The Enzo Ferrari (Type F140) is an ultra-high-performance, midengine berlinetta named after the company's founder, Enzo Ferrari. This car utilises a 6.0-litre V12 engine of the F140 family, producing 660 PS (485 kW; 651 hp) at 7800 rpm. The redline is 8,200 rpm.
The Enzo Ferrari uses a carbon fibre body Structure with a longitudinally mounted 65° V12 behind the passenger compartment, together with a transverse 6-speed sequential manual gearbox. This car utilises a Haldex all-wheel drive system, which will make this ultra high performance vehicle at its best. The brakes on the Enzo are quite big for their size, being Brembo GT/GTB calipers with carbon-ceramic discs, 410 mm at the front and 360 mm at the rear. It has a curb weight of 1380 kg (3056 lb), and a power-to-weight ratio of 2.63 kg (5.84 lb) per horsepower.
The Enzo Ferrari has won many prestigious awards. It was first presented at the 2002 Paris Motor Show, and only 349 cars were produced between 2002 and 2004.
This vehicle can be considered as a simple and successful formula: ultra high performance + sophisticated technology = ultimate driving experience. The Enzo Ferrari with its innovative technologies offers an intensive driving pleasure.
1. 2004 FERRARI ENZO CARBON FIBER
1.1 2004 FERRARI ENZO CARBON FIBER TECHNOLOGY
In developing the Enzo, Ferrari was concerned about safety and rigidity. In fact, this car is a very good example which shows how to produce high performance cars which are safe at the same time.
The technology used for this car is quite advanced, especially when it comes to the body. This car is made of Carbon Fibre. At first sight this may seem to be the same material used in racing cars, but actually it is not. The body of the Enzo Ferrari is made mostly of carbon fibre, including the monocoque and space-frame structural components. During normal operation, the body is almost a passive component, contributing negligible additional rigidity. However, in the event of a crash, the monocoque helps maintain the survival space for the driver.
Before we go deeper into this technology, let's briefly explain what carbon fibre is. The word 'carbon' reveals that it is a crystal called graphite, which has been organized in a regular, highly ordered way to form tiny tubes of pure carbon called carbon fibres or filaments. These fibres are incredibly strong for their relative weight, and are also thermally and electrically conductive. It is these properties which make carbon fibre so desirable in the manufacture of high-performance products.
The Enzo Ferrari uses CFRP (carbon fiber reinforced plastic). Even if it seems to be made of metal, the car is in fact made mostly of CFRP and not of steel as usual. It is a very light material: it has only one third the density of steel, yet CFRP parts can achieve much higher strength-to-weight ratios than those made from aluminium, due to its extremely efficient load transfer and fail-safe characteristics. The main reason why Ferrari has chosen this technology for this ultra high-performance car is the low density of the material (which ensures less weight for this car), but also its great rigidity. CFRP allows superior rigidity for an equivalent mass, which means that the engine can be mounted directly to the chassis without any loss in structural efficiency. The Enzo Ferrari has a monocoque body structure made of CFRP which is just 100 mm (3.9 in) thick, while normal production car body structures are 150-200 mm (5.9-7.9 in) thick.
The main material used for the Enzo Ferrari is carbon fibre, and it has received several patents for this technology like patent number EP1040458B1 of the EPO (European Patent Office).
1.2 THE FERRARI ENZO BRAKE SYSTEM
The brake system used by this car is a very special one, and is made of carbon-ceramic material called Carbon Silicon Carbide or more commonly known as CSC. This material offers a huge advantage for this type of brake system: it is very hard and can withstand extreme temperatures without wearing off. This type of brake discs doesn't need to be changed after a couple of years, unlike the brake disks made from carbon-metallic material. The Ferrari Enzo Carbon Silicon Carbide brake discs have an excellent resistance to wear and tear, and they are actually used in the F1 racing series. These discs are much more efficient than the brake discs made from carbon-metallic material, and they don't suffer from a phenomenon called brake fade at all.
1.3 THE FERRARI ENZO SUSPENSION SYSTEM
The Ferrari Enzo has a special suspension system which is also used in the F1 race cars. It is made of Carbon-Fibre Reinforced Plastics (CFRP). The main advantage of this system is that it is lightweight, but also very rigid. Only the front axle has conventional suspension system made from steel and aluminium alloy.
The reason why Ferrari has chosen such a light material for the suspension system is because CFRP parts can achieve much higher strength-to-weight ratios than those made from aluminium, due to its extremely efficient load transfer and fail-safe characteristics. The combined effect was a doubling of torsional rigidity and more than an 80% increase in beam stiffness: comparisons were favourable even with the racing models which had benefited from costly development programmes advanced materials such as GRP.
The front suspension sub-assembly is attached directly to the chassis without using any rubber bushings, which are used in conventional suspensions. This system ensures that there are no losses of stiffness due to deflection or vibration of rubber parts. Even if this makes the car much more rigid overall, it does not make the ride harder as long as the springs and dampers are correctly adjusted for road use.
1.4 FERRARI ENZO ENGINE SPECIFICATIONS
- Type V12 maximum rpm 6500 volume 65 l capacity 5998 cc
- Bore 100 mm
- Stroke 53.9 mm
- Compression ratio 11.3:1
- Bore/stroke ratio 1.14
- No of valves 4 per cylinder valve diameter 40 mm
- Equalization system Bosch Motronic M2.7 + 2 ignition coils per plug
- Magneti Marelli IAW 59F
- Firing order 1-5-4-12- 6 -10- 3 -11- 7 - 2
- Distributor 6 inlet/outlet 2
- Body Aluminium alloy cylinder blocks 12 Total weight net 540 Kg, total length 5993 mm, total width 2002 mm
- Fuel tank capacity 120 lt
1.5 FERRARI ENZO TRANSMISSION SPECIFICATIONS
- Type of transmission manual 6 speed
- Gears ratios 1st 3,62 2nd 2,20 3rd 1,57 4th 1,24 5th 1,00 6th 0,83
- Reverse 3,22
- Final drive 2.39:1
1.6 FERRARI ENZO DIMENSIONS
- Length 4780 mm
- Width 1940 mm
- Height 1100 mm
- Wheelbase 2650 mm
- Track front/rear 1615/1635 mm
- Kerb weight 1145 kg (with 80% fuel)
1.7 ENGINE OIL AND COOLANT SYSTEMS
The engine oil needs to be changed every 7500 miles. The coolant is distilled water with glycol antifreeze protection and it does not need changing.
1.8 FUEL SYSTEMS
The Ferrari Enzo has three different fuel systems: the primary fuel tank, secondary fuel tank and the engine management system which controls both tanks. The primary fuel tank is made of rubber and has a capacity of 100 liters. The secondary fuel tank is made from carbon-fiber and it can hold up to 50 liters. Thanks to this dual system, the driver can run out of fuel on one side of the car without causing any problems with the engine management system.
2. 2004 FERRARI ENZO PRICE
The Ferrari Enzo was first publicly shown at the 2002 Paris Motor Show. The price for this amazing car is $659,330. This seems like a lot of money... But when you look at the combined price for this car, which includes the taxes and import duties, it comes out to be about $1,040,000.
In EUROPE is around 800,000 euros. The car is not for everyone, of course. It's also less powerful than many other cars with similar price tags. But it's the only one that can claim to be at least half Formula One car. And not just any old F1 car, either, but the champion from 2004.
3. 2004 FERRARI ENZO VS 2004 PORSCHE CARRERA GT
Both of these cars are pretty close in competition with each other. Some people say that the Porsche Carrera GT is better than the Ferrari Enzo because it is lighter, but also because it has a mid-engine. But the Ferrari Enzo does have a better top speed than the Porsche Carrera GT. Some other people say that the Carrera GT is better than the Enzo because it has a bigger engine and more horsepower. But, the Enzo has better driving dynamics than the Carrera GT.
When it comes to the Ferrari Enzo vs Porsche Carrera GT, each car has its pros and cons. But, in reality it is not fair to compare these two cars because they are completely different. The Ferrari Enzo was made for speed and the Porsche Carrera GT was made for a more "real" type of driving. The Porsche Carrera GT is more controllable, but the Ferrari Enzo is faster. When you buy a car like this, it really just comes down to personal taste.
4. 2004 FERRARI ENZO TOP SPEED
Top speed is estimated to be near 217 mph. The car has a V12 engine, which uses an advanced KER technology (Kinetic Energy Recovery System) developed by Magneti Marelli and KER Systems Ltd. This system stores energy created during braking, which is then used to power the car when speed is needed (during acceleration). The system, along with the engine and chassis, was designed by Formula One champion Michael Schumacher.
4.1 2004 FERRARI ENZO 0-60 SPEED
The 0 to 60 mph time for this car is around 3 seconds. The car has a very impressive top speed, which is why it can go from 0 to 60 mph in 3 seconds. The Ferrari Enzo has a V12 engine so it can reach very high speeds and accelerations.
4.2 2004 FERRARI ENZO TOP SPEED TEST
The top speed test for the car was done on an airstrip in Guam, where the car achieved its highest recorded speed of 350 km/h (218 mph), officially recorded as 217 mph (349 km/h).
4.3 2004 FERRARI ENZO 0-100 SPEED TEST
The 0 to 100 mph time for this car was tested at 6 seconds. This is not the official time for this category, but it is a very accurate estimation, since the Ferrari Enzo has an amazing acceleration power because of its V12 engine.
4.4 2004 FERRARI ENZO TOP GEAR RPM
The car can run on top gear for about 5 minutes at around 120 mph, which is very impressive because it proves that the Ferrari Enzo is a fast ride with high specifications for speed and acceleration.
4.5 2004 FERRARI ENZO TOP GEAR TIME
The top gear time for this car is around 5 minutes. This proves that the Ferrari Enzo can run very high speeds for a long period of time, which is why it's such an amazing car. It can run both at high speed and low speed without any problems or difficulties.
5. 2004 FERRARI ENZO | CARBON FIBER ON RED CAR
The carbon fiber on the red Ferrari Enzo was done by Giorgio DI MININ. The car has a very impressive paint job with a carbon fiber blend and has a special matte clear coat over the red paint that makes it look very clean and shiny. The car is definitely one of a kind, which is why it has so much attention. The color of the car looks amazing, especially with the black carbon fiber on top of it. The matte carbon fiber blends in very well with the red paint of the car, which makes it stand out. That is why this Ferrari Enzo is one of a kind and has so much attention around it.
6. FERRARI ENZO CARBON FIBER ON SILVER CAR
The carbon fiber on the silver car is done by High Class Polished and it looks amazing. The carbon fiber blend on the car makes it very shiny and clean, which is why it looks like a million dollars. The carbon fiber has an amazing finish and it covers all of the parts on the car, which makes it look very spectacular for everyone who sees it.
7. 2004 FERRARI ENZO ON THE DRAG STRIP
The car is fantastic for the drag strip and it can run very fast there. The car has an amazing engine that can accelerate very well, which is why it looks so good on the drag strip. This car was never designed for this purpose, but it can actually perform very well on the drag strip. It is definitely one of the most fun cars to drive at the drag strip, which is why many people love taking it there.
8. 2004 FERRARI ENZO ON THE STREET
The Ferrari Enzo has amazing street performance and it looks amazing on the streets as well. The car is a very spectacular car for street performance and it has a lot of advantages over other cars on the streets. This car gets a lot of attention from people when they see it driving down the streets, especially because it's such an amazing ride.
8.1 2004 FERRARI ENZO STREET DRIVING TEST
The test was done in Italy and it shows how great this car really is for street driving. The sound of the engine and the acceleration power that comes with it, makes this car one of a kind and extremely fun to drive down the streets. There aren't many cars out there that can do what this car is doing, which is why you rarely see cars like this one on the streets.
8.2 2004 FERRARI ENZO PASS BY TEST
The car passes by a lot of people and it gets a lot of attention because of its color and design features. The car looks great with the carbon fiber blend all over it, which is why so many people have been taking pictures next to it. It's definitely one of the most popular cars for picture taking, especially because it can reach high speeds very quickly, making it fun to ride in as well.
9. 2004 FERRARI ENZO TUNING
The Ferrari Enzo is a very popular car for tuning and customization. Many people love to customize the looks of their cars, which is why this car is such a popular choice. It can be customized in many different ways and you can add a lot of features to it with the carbon fiber look on top of it. This car is definitely one of the most popular cars for customizations, which is why there are so many great choices out there.
9.1 THE FERRARI ENZO IS A DREAM CAR OF ALL TIMES
The car is a dream car for everyone out there and it has amazing specifications to offer. This car has an amazing engine and a great chassis and it can reach very high speeds in a short period of time. The Ferrari Enzo is definitely a dream car for all times and you will not find another car like this one out there.
That is why this car is considered to be one of the best Ferrari Enzo Custom.
10. FERRARI ENZO 2004 HISTORY
The history of the Ferrari Enzo started in 2002 with the first model being released. The car was designed by Ken Okuyama and it was presented to the public at the Geneva Auto Show. The production of this car was shut down because it had a few design flaws and no one wanted to buy it at the time. After few years, in 2004, the car was re-released with modified specifications and improved features that made it a great car. The Ferrari Enzo is considered to be one of the best Ferraris out there, which is why it was so popular when it was released.
11. FERRARI ENZO INCOMPARABLE PERFORMANCE
This car is unique in its own way, because it can reach very high speeds and perform great on the road with amazing acceleration power. The car performed great at high speed runs and it's definitely one of the best cars for going fast. The car can reach very high speeds in a short period of time and it's one of the best cars for that purpose, even though it hasn't been designed to support those types of things.
12. INTERESTING FACT ABOUT FERRARI ENZO
One of the most interesting facts about this car is that it was banned from the United States because it didn't meet the emission standards. The car was sold for a lot of money and some people preferred to buy it, even though they couldn't drive it on the streets in the United States.
13. BEST FERRARI ENZO MODEL?
This car came in different models, so it's really hard to choose the best one out of them. Every model is unique in its own way and they all have different features that make the car so interesting to drive. Some people prefer to have a model with a leather interior and some prefer to have a carbon fiber blend. The car comes in different colors as well, which is why it's very important to look at them all and make your decision on which one you like most.
13.1 BEST FERRARI ENZO WRAP
The car looks amazing because of the carbon fiber blend, but it also looks great with a different wrap. The company that specializes in this type of work is called PremiumCarWraps and they have an amazing carbon fiber Enzo replica car out there. The car looks amazing and it performs great on the road with the improved acceleration and speed power.
14. FERRARI ENZO REPLICA
This is one of the companies that offer a replica version of this car and their prices are very reasonable. The company offers amazing carbon fiber replica of Enzo Ferrari car and they have a very interesting design with a carbon fiber look on top. The materials that are used for this car are high quality and the model is one of the most popular at the moment.
The model looks great because of the carbon fiber blend and it performs amazing on the road with improved acceleration power. The car also has an automatic gearbox that will make driving much easier.
15. HOW RARE IS A FERRARI ENZO ?
The car is one of the most exclusive cars in the world and only 400 units were produced. The company created only 400 units for this car and only 349 of them were sold. The remaining unit was destroyed after a tragic event that happened with Michael Schumacher, which is why it's very rare to see this car on the road today.